Agriculture Solar Energy Mounting System Solutions
Effective use of space, power generation on the top, farming on the bottom, and getting both farming and power generation profits.
Securing a space where humans and farming machines can get inside.
Components pre-assembled in advance, it will save your labour cost and installation time.
Material：AL6005-T5 with surface Anodizing processing, achieving high corrosiom resistance and salt tolerance.
Depending on the panel installation method, the shading rate of the gantry can be adjusted to meet the required amount of sunlight for the plant.
Warranty:10 years warranty,25 years product service life.
Agriculture Solar Energy Mounting System Solutions
Product Description：
Solar agriculture ground racking system is located above the ground, does not affect the growth of the underlying crops, but also optimizes the use of solar energy. The frame surface is anodized highly, which is not easy to rust. Solar sharing mounting system is applied widely in farm land with ground screw foundation,which is installed in the height of 2m~4m (from Farmland to panel ),The left and right span can reach up to 5m,and it could make use of the light to generate electricity without affecting the growth of crops.The solar panel could be fixed in certain angle(5°~30°） leaving some gap from side of the solar panel to meet the sunshine needs of the crops and realize land reuse.
Technical Information:
Type: | Agriculture Solar Energy Mounting System Solutions |
Installation site: | Farm field |
Direction： | Horizontal |
Material: | Hot-dip galvanuzed steel&Al6005-T5 |
Fasten Material | Stainless steel 304 |
Max Wind Speed: | <60 m/s，（Vo:60m/s I:1.0 Gr:Ⅲ） |
Max Snow load: | <1.4 KN/M2 ，（Zs: 200cm P：30N Cs:1.0） |
Solar panel type: | Framed or Frameless |
Panel Orientation: | Horizental or vertical |
Earthquake Resistance | Kp:1.0 Ik:1.0 |
Angle | 0~90° |
Benefits：
1.Effective use of space, power generation on the top, farming on the bottom, and getting both farming and power generation profits.
2.Securing a space where humans and farming machines can get inside.
3.Components pre-assembled in advance, it will save your labour cost and installation time.
4.Material：AL6005-T5 with surface Anodizing processing, achieving high corrosiom resistance and salt tolerance.
5.Depending on the panel installation method, the shading rate of the gantry can be adjusted to meet the required amount of sunlight for the plant.
6.Warranty:10 years warranty,25 years product service life.
Project Reference：
To meet the sunshine gap need of crops, the height from ground is usually very high.Recommending the bottom panel fixed structure because of easy construction and satefy.There is no need to climb over the panel to install. Bottom panel fixed could make sure the safety of workers and prevent the panel from cracks.
Features：
1. It able to pre-assembled in factory to reduce the labor cost and installation time on site
2. High anti-corrosion
3. Customized availble as request
Parts Drawing：
connector schematic diagram:
If you need a design and quotation for your project, please share below data with us:
Module dimension: length, width and thickness?
Tilt angle?
Panel Layout: how many solar panels in a row, how many solar panels in a column and how many solar panels in total?
Snow load on project site?
Wind load on project site?
FAQ：
Q1: what is your primary products ?
A: Solar mounting system for rooftop, ground, car parking and agriculture. Also ground screw, fence,hook,etc.
Q2:Do we offer sample?
A: Yes. We offer free sample, Welcome to check our sample.
Q3: How long is our delivery time ?
A: 1-2 days for sample, about 1-3 weeks for massive production,depends on the quantity. lf we have items in stock that could ship immediately after payment.