продукты > Ballasted Flat Roof Top Mounting Bracket System
logo水泥墩三脚架压载板装配图.jpg
  • logo水泥墩三脚架压载板装配图.jpg
  • 图片2.png
  • 板三脚架.jpg
  • 压载板.jpg
  • 认证.jpg

Ballasted Flat Roof Top Mounting Bracket System

Ballasted Flat Roof Top Mounting Bracket System

Product Description:

1. The ballast tripod aluminum bracket has a track, which is easy to replace the panel when it is repaired later.

2. This design does not use expansion screws, and the non-penetrating installation method will not cause damage to the roof and will not leak.

The roof is secured only by concrete blocks or sandbags placed on the ballast tray, which greatly protects the roof.

3. The four sides of the arrangement are equipped with windshields, which have strong wind resistance to ensure that they can also be used in the scene of high wind speed.

4. The products are pre-assembled and shipped, saving a lot of on-site installation time.

5. It is suitable for almost all panel specifications and cement pier foundation specifications circulating on the market.

Since the palast type mount is fixed with concrete, it can be installed without making holes in the roof. It will not damage the roof.

Components pre-assembled in advance before package.Modules are easy to fixed, it will save your labour cost and installation time.

Material:AL6005-T5 with surface Anodizing treatment, achieving high strength and high corrosiom resistance.

Warranty:10 years warranty,25 years product service life.

 

Type:

Ballasted Flat Roof Top Mounting Bracket System

Installation site:

Flat Roof or Low Profile Roof

Direction:

Horizontal

Material:

Hot-dip galvanuzed steel&Al6005-T5

Fasten Material

Stainless steel 304

Max Wind Speed:

<60 m/s,(Vo:60m/s I:1.0 Gr:Ⅲ

Max Snow load:

 <1.4 KN/M2 ,(Zs: 200cm P30N Cs:1.0

Solar panel type:

Framed or Frameless

Panel Orientation:

Horizental or vertical

Earthquake Resistance

Kp:1.0 Ik:1.0

Angle

0~90°

 

 

Benefits:

1.Since the palast type mount is fixed with concrete, it can be installed without making holes in the roof. It will not damage the roof.

2.Components pre-assembled in advance before package.Modules are easy to fixed, it will save your labour cost and installation time.

3.MaterialAL6005-T5 with surface Anodizing treatment, achieving high strength and high corrosiom resistance.

4.Warranty:10 years warranty,25 years product service life.

 

 

Parts Drawing

图片3.png

Connector schematic diagram

图片4.png

图片5.png

1(1).jpg


办公室 照片(4).jpg


展会.jpg



If you need a design and quotation for your project, please share below data with us:
Module dimension: length, width and thickness?
Tilt angle?

Panel Layout: how many solar panels in a row, how many solar panels in a column and how many solar panels in total?
Snow load on project site?
Wind load on project site?

 

FAQ

Q1: what is your primary products ?

A: Solar mounting system for rooftop, ground, car parking and agriculture. Also ground screw, fence,hook,etc.

 

Q2:Do we offer sample?

A: Yes. We offer free sample, Welcome to check our sample.

 

Q3: How long is our delivery time ?

A: 1-2 days for sample, about 1-3 weeks for massive production,depends on the quantity. lf we have items in stock that could ship immediately after payment.